Strategies and Measures for Sustainable Urban Transport Systems

Increasing sustainability of urban transport systems is a crucial objective of all strategic plans both at national and European level. Different strategies and measures can be adopted to improve the efficiency of transport systems, according to a large set of factors that can affect the results of the implemented actions. A comprehensive study has been carried out in order to define a methodology able to define effective and efficient strategies and measures, allowing to increase the sustainability level of different kinds of cities, from small-medium sized to large metropolitan areas. The methodology has been tested on a group of 50 Italian cities, whose characteristics have been analysed through an initial set of more than 200 indicators. Three main groups of indicators have been taken into account: State indicators, Sustainability indicators, Policy indicators. The main aim has been to identify existing relationships between Sustainability and Policy indicators for cities showing commonalities in terms of State indicators. A correlation analysis allowed to identify 53 relevant indicators from the initial set of 200, while a cluster analysis, based on a hierarchical model, allowed to group the cities into five different groups, according to their population size and density. Correlations between relevant indicators have also been analysed within each group, while linear regression models have allowed to describe some functional relations between Policy and Sustainability indicators. A benchmarking exercise has allowed to identify strategies and measures adopted by the best performers within each group, hence defining possible paths to a better sustainability level for the remaining cities. Finally, recommendations for a correct urban mobility planning procedures have been produce

Data accuracy on automatic traffic counting: The SMART project results

Abstract In this paper the results of an experimental survey on traffic monitoring devices, named SMART Project, are presented. Aim of the project was to define the requirements to be applied to traffic technologies to match specific applications. The project involved the construction of a test site on a main road, where seven different traffic monitoring systems were installed. A 1 year survey was carried out to assess technologies response to environmental and mechanical solicitations. A reference system specifically devoted to check and validate the devices under test was designed for the project. Test procedures were also developed to control the results achieved. The outcomes accomplished for vehicles counting are described in details in the essay hereunder

Effectiveness of link and path information on simultaneous adjustment of dynamic O-D demand matrix

Introduction The paper deals with the adjustment of time-dependent Origin–destination (O-D) demand matrix, which is the fundamental input of ITS application for traffic predictions. The usual problem is to search for temporal O-D matrices that are "near" an a priori estimate (seed matrices) and that best fit traffic counts. However information on link flows is not fully effective in describing the state of the network; recent technologies for tracking vehicles provide a new kind of information on route travel times that can integrate usual information on traffic flows at count sections

SIGNAL SETTINGS SYNCHRONIZATION AND DYNAMIC TRAFFIC MODELLING

The object of the paper is to investigate the effect of signal synchronization on the traffic flow patterns on the network and validate results of synchronization problem in signal setting design. A platoon based traffic model is applied to solve both one-way and two-way synchronization problems in under-saturated conditions. Assessment of results through dynamic traffic assignment model shows that solution found is rather robust and, if more traffic is attracted by the improved arterial performance, larger benefits can be achieved on the whole network. A specific analysis has been conducted to point out the representation of queue propagation and the gridlock phenomenon

Multi-vehicle Stochastic Fundamental Diagram Consistent with Transportations Systems Theory

This paper describes a general approach to the specification the stable regime speed-flow function, for motorways, as a part of the stable regime Stochastic Fundamental Diagram consistent with main assumptions of Transportation Systems Theory. Main original elements are: • Specification of speed-flow functions consistent with travel time function, such as BPR-like functions; • Calibration from disaggregate data, say data from single vehicle trajectories; • Specification of the speed r. v. distribution consistent with those used in RUT for route choice behavior modelling, such as Gamma, Inv-Gamma

Dynamic O-D demand estimation: Application of SPSA AD-PI method in conjunction with different assignment strategies

This paper examines the impact of applying dynamic traffic assignment (DTA) and quasi-dynamic traffic assignment (QDTA) models, which apply different route choice approaches (shortest paths based on current travel times, User Equilibrium: UE, and system optimum: SO), on the accuracy of the solution of the offline dynamic demand estimation problem. The evaluation scheme is based on the adoption of a bilevel approach, where the upper level consists of the adjustment of a starting demand using traffic measures and the lower level of the solution of the traffic network assignment problem. The SPSA AD-PI (Simultaneous Perturbation Stochastic Approximation Asymmetric Design Polynomial Interpolation) is adopted as a solution algorithm. A comparative analysis is conducted on a test network and the results highlight the importance of route choice model and information for the stability and the quality of the offline dynamic demand estimations

Advanced traffic data for dynamic OD demand estimation: the state of the art and benchmark study

In this paper, the use of advanced traffic data is discussed to contribute to the ongoing debate about their applications in dynamic OD estimation. This is done by discussing the advantages and disadvantages of traffic data with support of the findings of a benchmark study. The benchmark framework is designed to assess the performance of the dynamic OD estimation methods using different traffic data. Results show that despite the use of traffic condition data to identify traffic regime, the use of unreliable prior OD demand has a strong influence on estimation ability. The greatest estimation occurs when the prior OD demand information is aligned with the real traffic state or omitted and using information from AVI measurements to establish accurate and meaningful values of OD demand. A common feature observed by methods in this paper indicates that advanced traffic data require more research attention and new techniques to turn them into usable information.Peer ReviewedPostprint (author's final draft

A Markov Chain Monte Carlo Approach for Estimating Daily Activity Patterns

Determining the purpose of trips brings is a fundamental information to evaluate travel demand during the day and to predict longer-term impacts on the population’s travel behavior. The concept of tours is the most suited to consider the value of a daily scheduling of individuals and travel interdependencies. However, the meticulous care required for both collecting data of high quality and interpret results of advanced demand models are frequently considered as major drawbacks. The objective of this study is to incorporate into a standard trip-based model some inherent concepts of activity-based models in order to enhance the representation of travel behavior. The main focus of this work is to infer, employing utility theory, the trip purpose of a population, at a zonal level. Making use of Markov Chain Monte Carlo, a set of parameters is estimated in order to retrieve tour-based primitives of the demand. The main advantage of this methodology is the low requirements in terms of data, as no individual information are used, and the good interpretation of the model. Estimated parameters of the priors set a utility-based probability function for departure time, which allows to have a dynamic overview of the demand. In order to account for the tour consistency of travel decisions, a duration constraint is added to the model. The proposed model is applied to the region of Luxembourg city and the results show the potential of the methodologies for dividing an observed demand based on the activity at destination

On Transport Monitoring and Forecasting during COVID-19 Pandemic in Rome

This paper presents the results of a study on the Rome mobility system aiming at estimating the impacts of the progressive lockdown, imposed by the government, due to the Covid-19 pandemic as well as to support decision makers in planning the transport system for the restart towards a post-Covid "new normal". The analysis of data obtained by the transport monitoring system has been fundamental for both investigating effects of the lockdown and feeding transport models to predict the impacts on future actions. At first, the paper focuses on the so-called transport analytics, by describing mobility trends for the multimodal transportation system of Rome. Then, the results of the simulated scenarios to design public transport services, able to ensure passengers social distancing required in the first post-Covid months, are presented and discussed

Marine Biodiversity in the Caribbean: Regional Estimates and Distribution Patterns

This paper provides an analysis of the distribution patterns of marine biodiversity and summarizes the major activities of the Census of Marine Life program in the Caribbean region. The coastal Caribbean region is a large marine ecosystem (LME) characterized by coral reefs, mangroves, and seagrasses, but including other environments, such as sandy beaches and rocky shores. These tropical ecosystems incorporate a high diversity of associated flora and fauna, and the nations that border the Caribbean collectively encompass a major global marine biodiversity hot spot. We analyze the state of knowledge of marine biodiversity based on the geographic distribution of georeferenced species records and regional taxonomic lists. A total of 12,046 marine species are reported in this paper for the Caribbean region. These include representatives from 31 animal phyla, two plant phyla, one group of Chromista, and three groups of Protoctista. Sampling effort has been greatest in shallow, nearshore waters, where there is relatively good coverage of species records; offshore and deep environments have been less studied. Additionally, we found that the currently accepted classification of marine ecoregions of the Caribbean did not apply for the benthic distributions of five relatively well known taxonomic groups. Coastal species richness tends to concentrate along the Antillean arc (Cuba to the southernmost Antilles) and the northern coast of South America (Venezuela – Colombia), while no pattern can be observed in the deep sea with the available data. Several factors make it impossible to determine the extent to which these distribution patterns accurately reflect the true situation for marine biodiversity in general: (1) highly localized concentrations of collecting effort and a lack of collecting in many areas and ecosystems, (2) high variability among collecting methods, (3) limited taxonomic expertise for many groups, and (4) differing levels of activity in the study of different taxa